Energy out of thin air

Posted: 

Engineering breakthrough extends smart phone battery charge

Photo of Professor Chi-Chih Chen, doctoral student Roland Tallos and Professor Robert Lee with the cell phone case they developed.
From left, Chi-Chih Chen, research associate professor of electrical and computer engineering, doctoral student Roland Tallos and Robert Lee, professor of electrical and computer engineering, have developed a cell phone case that will grab extraneous radio signals and convert them back into usable power, extending a battery’s charge. [photo by Kevin Fitzsimons]
New technology developed at The Ohio State University makes cell phone batteries last up to 30 percent longer on a single charge.

The patented circuitry converts some of the radio signals emanating from a phone into direct current (DC) power, which then charges the phone’s battery. This new technology can be built into a cell phone case, without adding more than a trivial amount of bulk and weight.

Some of the inventors—engineering researchers at Ohio State—are working with a spin-off company to further develop the technology for market validation and fund development.

“When we communicate with a cell tower or Wi-Fi router, so much energy goes to waste,” explained Chi-Chih Chen, research associate professor of electrical and computer engineering. “We recycle some of that wasted energy back into the battery.”

There are some products newly on the market that harvest stray radio signals to charge tiny wireless devices such as temperature sensors. But the Ohio State invention is many times more powerful and efficient, said Robert Lee, professor of electrical and computer engineering.

“These other devices are trying to harvest little bits of energy from the air,” Lee said. “Our technology is based on harvesting energy directly from the source. They can capture microwatts or even nanowatts (millionths or billionths of a watt), but cell phones need milliwatts (thousandths of a watt) or higher.”

By Lee’s reckoning, nearly 97 percent of cell phone signals never reach a destination and are simply lost. Not all of it can be recaptured, but enough can.

“No one can charge a cell phone from the air, but we can reduce power consumption by retrieving some of those lost milliwatts. Think of it as a battery extender rather than a charger,” Lee said.

The work is a natural outgrowth of Chen’s research, which focuses on the design of small antennas and radio frequency energy-harvesting circuitry. Whether he’s developing antennas to be embedded in clothing or a device for detecting and neutralizing buried land mines, the key is designing a circuit that quickly and easily identifies signals of interest, even when the antenna is moving.

The idea of converting radio signals into battery power may not seem straightforward, but the basic technology is almost as old as commercial electricity. It relies on the fact that radio waves are actually just a very high-frequency form of alternating current (AC).

As it happens, the power grid supplies AC, but most devices need DC to operate. For more than a century, electronics manufacturers have installed a special kind of electrical circuit called a rectifier to convert AC to DC. (The chunky, box-like protrusions on modern charging cables are, in part, rectifiers that designers have removed from portable electronics to save weight and bulk.)

To communicate, today’s portable devices broadcast radio signals—that is, high-frequency AC—a portion of which the Ohio State rectifier system captures and converts back to DC. Its trick is to siphon off just enough of the radio signal to noticeably slow battery drain, but not enough to degrade voice quality or data transmission.

Still, there’s a good bit of wasted radio signal to be had. For our convenience, cell phones broadcast in all directions at once; This is the fastest way for a portable device to reach the nearest cell tower or Wi-Fi router.

Chen and his colleagues came up with a system that not only identifies which radio signals are being wasted, but efficiently gobbles up the maximum amount of them that won’t compromise phone function.

It works only when a phone is transmitting—when a person is sending email, texting or talking on a phone.

But phones expend most of their energy in voice and data transfer, so the rectifier helps out when a battery needs it most, slowing power loss by up to 30 percent.

Next, the engineers want to insert the rectifier system into a “skin” that sticks directly to a phone.

Chen’s co-inventors include Can Koksal, associate professor of electrical and computer engineering; Ness Shroff, Ohio Eminent Scholar in Networking and Communications; and Roland Tallos, a doctoral student. Chen joined with Lee as well as John D. Bair, Rodolfo Bellesi, Flavio Lobato and Will Zell to form Nikola Labs, the company that will develop the technology.

The path to commercialization

“Nikola Labs is a wireless power company. Our technology is relevant to a number of consumer electronic devices as well as the billions of devices that are going to be coming online over the next decade,” explained CEO Will Zell. “We want to create the technology that can capture the ambient RF, but also charging solutions that would allow us to transmit power wirelessly.”

Already generating buzz, the startup has been covered extensively in the media, including the Columbus Dispatch, PC Magazine and Engineering.com. The team captured first place and the Clean Energy Award in the 2015 Ohio State Business Plan Competition and earned the Audience Choice Award when they debuted their first fully functional smart phone case prototype at TechCrunch Disrupt NYC.

Nikola Labs received a $100,000 Ohio Third Frontier Technology Validation and Start-Up Fund grant that supports commercialization. Zell said the company also has raised outside investment capital.

Ultimately, they would like to partner with a manufacturer to build the technology directly into a phone, tablet or other portable electronic device.

“What we thought would take 18 months, which is having interest from some of the phone manufacturers, has taken six months,” Zell said.

Zell and his team are now considering three potential paths for commercialization: manufacturing the cases themselves, working with a case manufacturing company or seeing if there’s genuine interest from manufacturers to incorporate it into their phones.

“It’s been great working with Ohio State,” said Zell. “And all is very well with Nikola Labs. We just need to serve customers, build the team and rock this technology.”

by Pam Frost Gorder, University Communications, and Candi Clevenger, College of Engineering Communications

Categories: FacultyResearch